During the production process of the product, the fouling of the mold seems to be a small problem, but it is actually a big problem. Why do you say that? For example, production factories generally use piece-rate production. Of course, piece-rate production is related to how many products can be produced in a short period of time. Employees can produce more products within 8 hours. Of course, more income can be earned, and no one wants to waste limited production time on cleaning molds.
1. Product size problem: It is obvious that too much mold fouling will definitely affect the size of the product. Especially for bas-relief shading molds, in-mold paint, self-skinning and other molds, wax-based mold release agents are prone to fouling, and molds are washed almost once a day! Seriously affect the production efficiency, too many cleaning times, destroy the mold!
Secondly, for the slow rebound system, the surface is sticky, and it is easy to stick to wax scales, which affects the ornamental quality and requires additional manual processing.
2. The problem of continuous production: Too much fouling of the mold in a short period of time will cause the production line to stop to clean the mold, and the cleaning of large molds will waste manpower and material resources, resulting in the introduction of a fully automatic production line that can only be used as a semi-automatic production line, which cannot save labor and improve production efficiency.
According to our physical inspection data, the continuous production of 30 molds shall prevail, 5 workers are required, and the production is stopped for more than 3 hours. The cost of nearly 1,600 yuan cannot be converted into benefits. If the mold is washed in 3 days.
3. Environmental protection issues: The high-frequency use of mold-washing water materials not only causes waste, but also puts pressure on factories to face environmental protection and waste recycling.
So the fouling problem caused by the release agent is not a small problem but a very fatal problem.
Longderun tire inner spraying liquid 7207 is a kind of tire inner spraying liquid containing inorganic fillers. Because the product contains fillers, it has good exhaust performance, the inner surface of the tire after vulcanization is bright and smooth, and the inner liner will not have the common negative effects of silicone oil products. The product is sprayed by pneumatic method, which is easy to operate, short drying time, less dosage and excellent benefit.
Disclaimer: The picture materials and articles on this platform are from the Internet, so the copyright belongs to the original author. If your copyright and interests are infringed, please contact us, we will apologize and delete it quickly. Article source: Internet
Latest news
- The Combination and Foaming Process of
- Famous tire enterprise with multiple d
- Ministry of Commerce Initiate a final
- The Effect of Carbon Black on the Cutt
- Stop work orders encounter rising pric
- Lanzhou Petrochemical's carboxylated n
Contact us
- ADD: Room 4210, CEC Business Hall, No. 121-4, Nanjing South Street, Heping District, Shenyang
- TEL: 13644907299
- FAX: 024-25361668
- E-mail: boss@long-green.cn
> Industry news